Base Stand for RLF300, RLF750, or RLF1500

The base stand holds an RLF panel upright on the floor without wall fixings or door hardware. It is the lightest stand we list, and it is intended for the smaller panels in the range: the RLF300, the RLF750 and the RLF1500.

Every RLF panel is supplied with a door hanger and chains, which works well enough when the panel can live in one place. The base stand covers the situations that arrangement does not — a panel that needs to stand clear of a wall, sit beside a chair or a treatment couch, or be taken to another room and set up again in a few seconds.

This is a carry-and-place stand. There is no powered adjustment and no rolling base, which is what keeps the weight and the cost down. Where a panel stays in one room but is moved around it constantly, the wide base stand runs on castors instead and is the better fit.

Compatibility

Three panels are listed for this stand.

The RLF3000 and the RLF6000 are not listed for it. Both are full-body panels, taller and considerably heavier, and they belong on a floor stand. The other options are set out in stands for panels.

Specification

Questions

Which panels does the base stand fit?

The RLF300, the RLF750 and the RLF1500. The RLF300 is not currently available to order, so in practice this stand is bought for one of the other two.

Will it take an RLF3000 or RLF6000?

No. Neither panel is listed for this stand. The RLF3000 is 150cm tall and 21.5kg, the RLF6000 is 180cm and 40.6kg, and both need a floor stand built for that height and load.

Do I still get the door hanger with the panel?

Yes. The hanger and chains are supplied with the panel regardless of whether a stand is ordered alongside it, so both mounting methods remain open to you.

How does this differ from the wide base stand?

The wide base stand is heavier, has a broader footprint, carries up to 50kg and rolls on castors. This one is lighter and is lifted rather than wheeled. The wide stand also extends compatibility up to the RLF3000.